Diyoole abrasive fluid polishing machine is often used to deburr the inner hole and cross hole of the mold, without destroying the surface of the inner hole of the mold.
 
The more burrs, the lower the quality standard . In order to improve product quality and service life, it is necessary to remove burrs on all precision metal parts. The workpiece surface, sharp edges and edges must achieve extremely high cleanliness. Traditional deburring processes are mechanical processes, such as grinding, polishing and other processes with varying degrees of automation. The quality of the processed parts is often not guaranteed, and the production cost and personnel cost are very high. Abrasive flow deburring technology is used. After the workpiece is clamped by the metallurgical tool, the above and below reciprocating extrusion makes the abrasive flow through the surface, cross hole or end angle of the workpiece to deburring, polishing or chamfering according to the requirement. The abrasive flow can be controlled by time and flow computer to achieve automatic, economical and efficient polishing. The polishing marks and workpieces can be used. In the same direction, it has the same directional processing characteristics.

Diyoole Intelligent Equipment Co., Ltd. is good at deburring complex inner holes of various precision metals. If you encounter the problem of deburring cross holes in the mold, as long as you make a phone call, you can always provide an optimal deburring program! Welcome to inquire: 1780752158517721225073!