Abrasive flow machine is suitable for polishing the wire inner hole mold.
       Abrasive fluid polishing machine is suitable for the polishing of inner hole mold. Zhejiang Diyoole Intelligent Equipment Co., Ltd. produces fluid polishing machine for more than ten years. It has rich polishing experience.the inner hole mold suitable for polishing with fluid polishing machine. The polishing of  inner hole mold is always a difficult problem in traditional manual polishing. Especially, the right-angle edge and narrow cutting gap are the areas that can not be reached by hand knife and abrasive tool. Using fluid polishing machine to polish the mold of such a complex surface, the mold can be polished quickly and evenly in two minutes. Mirror polishing can effectively improve and prolong the service life of dies.
Drawing dies usually refer to all kinds of dies for  metal wires, and drawing dies for drawing optical fibers. The center of all drawing dies has a certain shape hole, round, square, octagonal or other special shapes. When the metal is pulled through the die hole, the size becomes smaller and even the shape changes. When the soft metal (such as gold and silver) is pulled, the steel mould is enough, and there are many holes with different diameters on the steel mould.
Wire drawing dies are widely used, such as high-precision wires for electronic devices, radar, television, instrumentation and aerospace, as well as tungsten, molybdenum, stainless steel, wire and cable wires and various alloy wires commonly used are drawn from diamond wire drawing dies. Diamond wire drawing dies are made of natural diamond as raw materials. Extremely strong abrasion resistance and high service life. Surface polishing, grinding and cleaning, removing oxide film (without damaging the surface shape of the workpiece), deburring, surface rusting of the finished product of the fluid polishing machine, and producing strong and stable magnetic induction effect by utilizing its unique magnetic field distribution, make the magnetic steel needle and the workpiece carry on omni-directional and multi-angle fully. Grinding, to achieve rapid rust removal, to remove dead angle, remove burrs, remove oxide film and sintering marks and other effects. Using its unique magnetic field distribution, it produces strong and stable magnetic induction effect, which enables magnetic steel needle and workpiece to be fully grinded in an all-round and multi-angle way, achieving the functions of rapid rust removal, dead angle removal, burr tip removal, oxide film removal and sintering trace removal. The manufacturer of fluid polishing machine introduces the equipment suitable for polishing the die of drawing inner hole. The manufacturer of fluid polishing machine introduces the equipment suitable for polishing the die of drawing inner hole.